|
|
SECTION I - IDENTIFICATION
Trade Name: Algae-Off PRO
85%
Product Type: Pond and Lake Algae Treatment
Manufacturer: Winston Company, Inc
7704 E 38th St
Tulsa, OK 74145
United States of America
Office
Telephone Numbers: (800)331-9099 or (918) 610-1006
SECTION II - COMPONENTS (Hazardous & Other)
INGREDIENTS CAS # PERCENTAGE BY WEIGHT
Sodium
percarbonate 15630-89-4 85 %
Other ingredients 15%
SECTION III - PHYSICAL DATA
Appearance: White,
granular, solid
Odor: None
Bulk Density: 1.0 – 1.2
g/cm3
Solubility: 140 g/l @ 24° C (75° F)
PH: 1%
solution: 10.4 – 10.6
SECTION IV - FIRE AND
EXPLOSION HAZARD DATA
Special Fire Hazards: Oxidizing
substances that causes exothermic reactions with organic
materials.
Fire Fighting Methods: Product is not
flammable and can be quickly diluted with clean water.
Specific Hazards: Reacts with oxidizing substances –
decomposition may support combustion.
SECTION V -
HEALTH HAZARD DATA
INHALATION: Slight nose and throat
irritation
EYE CONTACT: Severe eye irritation, risk of
serious eye lesions
SKIN CONTACT: Slight irritation
INGESTION: Severe irritation of the mouth, throat esophagus
and stomach
TOXICOLOGICAL INFORMATION:
Acute Toxicity: Dermal = LD50 rat > 5000 mg/kg
Inhalation
= LC 0 1 hour, rat > 4580 mg/m
Oral = LD50 rat 1526 mg/kg
EMERGENCY AND FIRST AID PROCEDURES
If
inhaled: Immediately move the person to fresh air. Consult
with a physician in case of respiratory symptoms.
Eyes:
Immediately flush with plenty of cool running water. Remove
contact lenses. Continue flushing for at least 15 minutes,
holding eyelids apart to ensure rinsing of the entire eye.
Call a physician immediately.
Skin: Remove contaminated
shoes, socks and clothing. Wash the affected skin with
running water. Wash clothing before reuse.
If Swallowed:
Consult a physician. If conscious, rinse mouth and
administer fresh water. Do NOT induce vomiting. UNDER NO
CIRCUMSTANCES give anything by mouth to an unconscious
person.
WARNING STATEMENTS
CAUTION! KEEP OUT
OF REACH OF CHILDREN. MAY CAUSE SKIN OR EYE IRRITATION.
STORE IN COOL DRY PLACE. AVOID CONTACT WITH SKIN AND
CLOTHING AND EXCESSIVE INHALATION. WASH HANDS, CLOTHING AND
EQUIPMENT AFTER USE.
SECTION VI REACTIVITY DATA
STABILITY: Stable under normal conditions
CONDITIONS TO AVOID: Heat/Sources of Heat • Water/Moisture •
Acids • Bases • Reducing Agents • Organic Materials
MATERIALS TO AVOID: Oxidizing agents attack the organic
components of these products. As with other organic
carbonaceous compounds, these reactions produce heat which
if contained in a confined space can cause fires.
Hypochlorites, chlorinated isocyanurates, and perborates are
examples of oxidizing agents.
HAZARDOUS DECOMPOSITION
PRODUCTS: No uniquely hazardous decomposition products are
expected. If the organic portion of product is burned, as
with any nitrogen containing organic material, oxides or
nitrogen, carbon dioxide, and water can be produced. Partial
combustion may produce, in addition to the above, soot and
various oxides of carbon.
SECTION VII - SPILL,
LEAK, AND DISPOSAL INFORMATION
WASTE DISPOSAL: Do Not
return spilled or contaminated material to inventory. Clean
the area with large quantities of clean, cold water.
CLEAN UP: Collect the product with suitable means, shovel,
and sweep, avoiding dust formation.
SECTION VIII -
SAFE HANDLING AND USE INFORMATION
• Never return
unused product to the original container.
• Keep
concentrate away from reactive substances.
• Prevent
contact with organic materials.
• Keep product in
original container
• Store in cool, dry area
Eye
Protection: ANSI approved safety glasses with side
protection, and also dust proof. It is generally recognized
that contact lenses should not be worn when working with
chemicals because contact lenses may contribute to the
severity of an eye injury.
Skin Protection: Body-covering
clothing.
Hygienic Practices: Wear protective gloves
that are chemical resistant. Always wash hands after
handling chemical.
Respiratory Practices: In most
circumstances, no respiratory protection should be needed.
SECTION IX - SPECIAL PRECAUTIONS
PRECAUTIONS
TO BE TAKEN IN HANDLING AND STORING: Maintain good
housekeeping, avoid creating aerosols. For maintenance of
product quality, store in dry cool (under 110F) warehouse
conditions.
|
KEEP OUT OF REACH OF CHILDREN
|
ALTHOUGH THE INFORMATION AND RECOMMENDATIONS SET FORTH IN
THIS SHEET ARE BELIEVED TO BE CORRECT AS OF THE DATE HEREOF,
WINSTON COMPANY, INC. MAKES NO REPRESENTATION AS TO THE
COMPLETENESS OR ACCURACY OF SUCH INFORMATION AND
RECOMMENDATIONS. WINSTON COMPANY, INC SHALL IN NO EVENT BE
RESPONSIBLE FOR ANY DAMAGES OF WHATSOEVER NATURE DIRECTLY OR
INDIRECTLY RESULTING FROM THE PUBLICATION OR USE OF OR
RELIANCE UPON SUCH INFORMATION AND RECOMMENDATIONS. YOU ARE
ENCOURAGED TO ADVISE ANYONE WORKING WITH OR EXPOSED TO SUCH
PRODUCTS OF THE INFORMATION CONTAINED HEREIN.
NO
WARRANTY, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY OR
FITNESS OR OF ANY OTHER NATURE WITH RESPECT TO THE PRODUCT
OR TO THE INFORMATION AND RECOMMENDATIONS HEREIN MADE
HEREUNDER.
Winston Company, Inc. has lead the
biological water treatment industry for over 25 years now by
offering only the highest quality bacteria and enzyme
solutions for municipal wastewater treatment, sludge
treatment and pond treatment. |
|
